Next: Appendix A
Up: No Title
Previous: Possible Future Extensions
References
- 1
-
AHMAD, S.
Real-time multi-processor based robot control.
In IEEE Int. Conf. Robotics and Automation (1986),
pp. 858-863.
- 2
-
AHMAD, S., AND LI, B.
Optimal design of multiple arithmetic processor-based robot
controllers.
In IEEE Int. Conf. Robotics and Automation (1987),
pp. 660-663.
- 3
-
ASADA, H., AND SLOTINE, J. J. E.
Robot Analysis and Control.
J. Wiley and Sons, 1986.
- 4
-
BUKHRES, O. A., CHEN, J., DU, W., AND ELMAGARMID, A. K.
Interbase: An execution environment for heterogeneous software
systems.
IEEE Computer Magazine (Aug. 1993), pp. 57-69.
- 5
-
CHEN, Y.
Frequency response of discrete-time robot systems - limitations of pd
controllers and improvements by lag-lead compensation.
In IEEE Int. Conf. Robotics and Automation (1987),
pp. 464-472.
- 6
-
CHIU, S. L.
Kinematic characterization of manipulators: An approach to defining
optimality.
In IEEE Int. Conf. Robotics and Automation (1988),
pp. 828-833.
- 7
-
CRAIG, J.
Introduction To Robotics.
Addison-Wesley, 1989.
- 8
-
CUTKOSKY, M. R., ENGELMORE, R. S., FIKES, R. E., GENESERETH, M. R., GRUBER, T. R., MARK, W. S., TENENBAUM, J. M., AND WEBER, J. C.
PACT: An experiment in integrating concurrent engineering systems.
IEEE Computer Magazine (Jan. 1993), pp. 28-37.
- 9
-
DEKHIL, M., SOBH, T. M., AND HENDERSON, T. C.
Prototyping environment for robot manipulators.
Tech. Rep. UUCS-93-021, University of Utah, Sept. 1993.
- 10
-
DEKHIL, M., SOBH, T. M., AND HENDERSON, T. C.
URK: Utah Robot Kit - a 3-link robot manipulator prototype.
In IEEE Int. Conf. Robotics and Automation (May 1994).
- 11
-
DEPKOVICH, T. M., AND STOUGHTON, R. M.
A general approach for manipulator system specification, design, and
validation.
In IEEE Int. Conf. Robotics and Automation (1989),
pp. 1402-1407.
- 12
-
DEWAN, P., AND RIEDL, J.
Toward computer-supported concurrent software engineering.
IEEE Computer Magazine (Jan. 1993), pp. 17-27.
- 13
-
DUHOVNIK, J., TAVCAR, J., AND KOPOREC, J.
Project manager with quality assurance.
Computer-Aided Design 25, 5 (May 1993), pp. 311-319.
- 14
-
FUJIOKA, Y., AND KAMEYAMA, M.
2400-mflops reconfigurable parallel VLSI processor for robot
control.
In IEEE Int. Conf. Robotics and Automation (1993),
pp. 149-154.
- 15
-
GEFFIN, S., AND FURHT, B.
A dataflow multiprocessor system for robot arm control.
Int. J. Robotics Research 9, 3 (June 1990), pp. 93-103.
- 16
-
GOTTFRIED, B. S., AND WEISMAN, J.
Introduction To Optimization Theory.
Printice-Hall, 1973.
- 17
-
HASHIMOTO, K., AND KIMURA, H.
A new parallel algorithm for inverse dynamics.
Int. J. Robotics Research 8, 1 (Feb. 1989), pp. 63-76.
- 18
-
HERRERA-BENDEZU, L. G., MU, E., AND CAIN, J. T.
Symbolic computation of robot manipulator kinematics.
In IEEE Int. Conf. Robotics and Automation (1988),
pp. 993-998.
- 19
-
HOLLERBACH, J.
Optimum kinematic design for a seven degree of freedom manipulator.
In Robotics Research: 2nd Int. Symp. (1985), H. Hanafusa and
H. Inous, Eds., MIT Press, pp. 215-222.
- 20
-
IZAGUIRRE, A., HASHIMOTO, M., PAUL, R. P., AND HAYWARD, V.
A new computational structure for real-time dynamics.
Int. J. Robotics Research 8, 1 (Feb. 1989), pp. 346-361.
- 21
-
KAWAMURA, S., MIYAZAKI, F., AND ARIMOTO, S.
Is a local linear pd feedback control law effictive for trajectory
tracking of robot motion?
In IEEE Int. Conf. Robotics and Automation (1988),
pp. 1335-1340.
- 22
-
KAZANZIDES, P., WASTI, H., AND WOLOVICH, W. A.
A multiprocessor system for real-time robotic control: Design and
applications.
In IEEE Int. Conf. Robotics and Automation (1987),
pp. 1903-1908.
- 23
-
KELMAR, L., AND KHOSLA, P. K.
Automatic generation of forward and inverse kinematics for a
reconfigurable manipulator system.
Journal of Robotic Systems 7, 4 (1990), pp. 599-619.
- 24
-
KHOSLA, P., KANADE, T., HOFFMAN, R., SCHMITZ, D., AND DELOUIS, M.
The Carnegie Mellon reconfigurable modular manipulator system
project.
Tech. rep., Carnegie Mellon University, 1992.
- 25
-
KHOSLA, P. K.
Choosing sampling rates for robot control.
In IEEE Int. Conf. Robotics and Automation (1987),
pp. 169-174.
- 26
-
KIRCANSKI, N., PETROVIC, T., AND VUKOBRATOVIC, M.
A parallel computer architecture for real-time control applications
in grasping and manipulation.
In IEEE Int. Conf. Robotics and Automation (1993),
pp. 410-415.
- 27
-
KUNG, S., AND HWANG, J.
Neural network architectures for robot applications.
IEEE Trans. Robotics and Automation 5, 5 (Oct. 1989), pp.
641-657.
- 28
-
LAMB, D. A.
Software Engineering: Planning for Change.
Prentice Hall, 1988.
- 29
-
LATHROP, R. H.
Parallelism in manipulator dynamics.
Int. J. Robotics Research 4, 2 (1985), pp. 80-102.
- 30
-
LEE, C. S. G., AND CHANG, P. R.
Efficient parallel algorithms for robot forward dynamics computation.
In IEEE Int. Conf. Robotics and Automation (1987),
pp. 654-659.
- 31
-
LEUNG, S. S., AND SHANBLATT, M. A.
Computer architecture design for robotics.
In IEEE Int. Conf. Robotics and Automation (1988),
pp. 453-456.
- 32
-
LEUNG, S. S., AND SHANBLATT, M. A.
A conceptual framework for designing robotic computational hardware
with asic technology.
In IEEE Int. Conf. Robotics and Automation (1988),
pp. 461-464.
- 33
-
LEWIS, F. L., ABDALLAH, C. T., AND DAWSON, D.
Control of Robot Manipulator.
Macmillan, 1993.
- 34
-
LI, C., HEMAMI, A., AND SANKAR, T. S.
A new computational method for linearized dynamics models for robot
manipulators.
Int. J. Robotics Research 9, 1 (Feb. 1990), pp. 134-146.
- 35
-
LING, Y. L. C., SADAYAPPAN, P., OLSON, K. W., AND ORIN, D. E.
A VLSI robotics vector processor for real-time control.
In IEEE Int. Conf. Robotics and Automation (1988),
pp. 303-308.
- 36
-
LIU, C., AND CHEN, Y.
Multi-processor-based cartesian-space control techniques for a
mechanical manipulator.
IEEE Trans. Robotics and Automation 2, 2 (June 1986), pp.
110-115.
- 37
-
LUH, J. Y. S., AND LIN, C. S.
Scheduling of parallel computation for a computer-controlled
mechanical manipulator.
IEEE Trans. Systems Man and Cybernetics 12, 2 (1984), pp.
214-234.
- 38
-
MA, O., AND ANGELES, J.
Optimum design of manipulators under dynamic isotropy conditions.
In IEEE Int. Conf. Robotics and Automation (1993),
pp. 470-475.
- 39
-
MAREFAT, M., MALHORTA, S., AND KASHYAP, R. L.
Object-oriented intelligent computer-integrated design, process
planning, and inspection.
IEEE Computer Magazine (Mar. 1993), pp. 54-65.
- 40
-
MAYORGA, R. V., RESSA, B., AND WONG, A. K. C.
A kinematic criterion for the design optimization of robot
manipulators.
In IEEE Int. Conf. Robotics and Automation (1991),
pp. 578-583.
- 41
-
MAYORGA, R. V., RESSA, B., AND WONG, A. K. C.
A kinematic design optimization of robot manipulators.
In IEEE Int. Conf. Robotics and Automation (1992),
pp. 396-401.
- 42
-
NICOL, J. R., WILKES, C. T., AND MANOLA, F. A.
Object orientation in heterogeneous distributed computing systems.
IEEE Computer Magazine (June 1993), pp. 57-67.
- 43
-
NIGAM, R., AND LEE, C. S. G.
A multiprocessor-based controller for mechanical manipulators.
IEEE Journal of Robotics and Automation 1, 4 (1985), pp.
173-182.
- 44
-
PAUL, B., AND ROSA, J.
Kinematics simulation of serial manipulators.
Int. J. Robotics Research 5, 2 (Summer 1986), pp. 14-31.
- 45
-
PAUL, R. P.
Robot Manipulators: Mathematics, Programming, and Control.
The MIT Press, 1981.
- 46
-
RIESELER, H., AND WAHL, F. M.
Fast symbolic computation of the inverse kinematics of robots.
In IEEE Int. Conf. Robotics and Automation (1990),
pp. 462-467.
- 47
-
SADAYAPPAN, P., LING, Y. C., AND OLSON, K. W.
A restructable VLSI robotics vector processor architecture for
real-time control.
IEEE Trans. Robotics and Automation 5, 5 (Oct. 1989), pp.
583-599.
- 48
-
SHILLER, Z., AND SUNDAR, S.
Design of robot manipulators for optimal dynamic performance.
In IEEE Int. Conf. Robotics and Automation (1991),
pp. 344-349.
- 49
-
SOBH, T. M., DEKHIL, M., AND HENDERSON, T. C.
Prototyping a robot manipulator and controller.
Tech. Rep. UUCS-93-013, Univ. of Utah, June 1993.
- 50
-
SRIRAM, D., AND LOGCHER, R.
The MIT dice project.
IEEE Computer Magazine (Jan. 1993), pp. 64-71.
- 51
-
TAKANO, M., MASAKI, H., AND SASAKI, K.
Concept of total computer-aided design system of robot manipulators.
In Robotics Research: 3rd Int. Symp. (1986), pp. 289-296.
- 52
-
TAROKH, M., AND SERAJI, H.
A control scheme for trajectory tracking of robot manipulators.
In IEEE Int. Conf. Robotics and Automation (1988),
pp. 1192-1197.
- 53
-
TOOLE, H.
Optimization Methods.
Springer-Verlag, 1975.
- 54
-
WILL, P.
Information technology and manufacturing.
CSTB/NRC Preliminary Report 1, National Academy Press, Nov. 1993.
- 55
-
ZHANG, H., AND PAUL, R. P.
A parallel inverse kinematics solution for robot manipulators based
on multiprocessing and linear extrapolation.
In IEEE Int. Conf. Robotics and Automation (1990),
pp. 468-474.
Matanya Elchanani
Wed Dec 18 17:00:21 EST 1996